Case study · Network hardware

Smart Home Network Rebuild

A failed router left a smart home’s phones, TVs, and Crestron automation system without a working network. Our team replaced the core network with Ubiquiti UniFi equipment and had everything back online within three days of opening the work order.

At a glance

ClientPrivate residence of a business owner client, with a Crestron home automation system
ProblemThe router stopped handing out network addresses, so devices could not connect
What we replacedRouter, core switch, and five wireless access points
New platformUbiquiti UniFi
TimelineWork order opened Nov 6, 2026; cutover complete and confirmed Nov 9
ResultCrestron working locally and remotely, Wi-Fi back for every device, integrator given access

Situation

The home ran on an older Pakedge network: one router, a core switch, and five wireless access points spread through the house. That network carried everything, including the household’s phones and laptops, the TVs, and the Crestron system that runs the home’s automation.

The network had been unreliable for a while, and then the router stopped handing out addresses entirely. New connections got a self-assigned address that goes nowhere, so phones and laptops could not get online and the Crestron equipment could not reach the network it depends on. In a smart home, a dead router takes the automation down along with the internet.

Mission

We agreed on what done looked like before touching any equipment:

  • Every Crestron device works, both inside the house and remotely through the integrator’s tools.
  • Every phone, laptop, and TV can join Wi-Fi again, ideally without anyone re-entering a password.
  • The new network is documented, and the AV integrator can still manage their side of it.

A house full of TVs, panels, and smart devices is painful to reconnect one at a time, so we planned the switch to be invisible to them.

Execution

  1. Mapped what was there

    We worked with the AV integrator to list the devices that use fixed network addresses, including the switch, the access points, and the Crestron processor, so nothing that depends on a known address would get lost in the move.

  2. Wrote the cutover plan first

    A step-by-step runbook covered the order of the swap, what to test at each step, and how to roll back if something failed.

  3. Replaced the core network

    The Pakedge router, core switch, and five access points came out, and Ubiquiti UniFi equipment went in.

  4. Kept the Wi-Fi familiar

    The new network used the same Wi-Fi name and password, with compatibility settings matched to the old network, so phones, TVs, and panels reconnected on their own.

  5. Tested before calling it done

    We confirmed the Crestron system worked from inside the house and remotely, and that devices were back on Wi-Fi.

Working alongside the AV integrator

A smart home has two technical owners: the IT side and the AV integrator. We treated the integrator as part of the team from the start, so their system was planned for instead of discovered after the swap. They supplied the address list for their equipment before the cutover, and afterward we gave them access to the new UniFi network so they can support their equipment without waiting on us.

Results

  • Router, core switch, and five access points replaced with Ubiquiti UniFi equipment.
  • Crestron system confirmed working locally and remotely.
  • Devices back on Wi-Fi without the household re-entering passwords.
  • Work order to confirmed completion in three days, Nov 6 to Nov 9, 2026.
  • The AV integrator has access to the new network.

To get every device back online automatically, the cutover kept the old Wi-Fi password and older security settings. We left the homeowner a written recommendation for the next step: a stronger password and newer Wi-Fi security, planned with the integrator because every device has to rejoin.

Network acting up?

Schedule a walkthrough and we will show you what is worth fixing first, with a written plan before anything changes.

Call 810-377-8189Free assessment